|
Title: ram clear install Post by: tx73 on September 01, 2009, 04:28:30 AM hi all, i had the wms 360 machines( the one that we sit down to play) i just bought the ram clear chip because i want to change to different game, but when i put the ram clear chip into the x3 slot, it shows some red boxes in the monitor, but i don't know how to set it up . could you guys help me how to install the clear ram chip to let it works. thank you very much
Title: Re: ram clear install Post by: knagl on September 01, 2009, 06:06:52 AM Hi, tx73. Welcome to :nlg-!
Is this for a video machine? If so, your post probably would get a better response in the WMS video (http://newlifegames.net/nlg/index.php?board=54.0) section (I'm sure a mod will be happy to move it there). I've never owned a WMS video machine so I can't provide much in the way of help myself, but I'm sure someone else on the site will be along shortly to help you out. Again, welcome! Title: Re: ram clear install Post by: tacman on September 01, 2009, 09:45:21 AM tx73, welcome to NLG! :3- Check the "Submit New File" tab under the vendor area for WMS 550. It will give you the ram clear procedures and then under the technicians menu, any changes in denominations, tokenization, etc. The 550 is the upright model while your 360 is the slant top model.
Dan (tacman) Title: Re: ram clear install Post by: tx73 on September 02, 2009, 03:47:27 AM thank you very much for your help. its work. :89-
Title: Re: ram clear install Post by: StatFreak on September 02, 2009, 03:49:50 AM thank you very much for your help. its work. :89- Glad to hear it. Thanks for posting back. :71- ..and welcome to NLG tx73. :88- Are you a Ham Radio Operator? Title: To: StatFreak Post by: tx73 on September 03, 2009, 02:39:05 AM no sir, i am not a ham radio operator, i just owned some of the wms 360 slant top. but i believe that i could need some more helps in the future cause i am new to these machines. :88-
Title: Re: ram clear install Post by: StatFreak on September 03, 2009, 09:47:26 AM no sir, i am not a ham radio operator, i just owned some of the wms 360 slant top. but i believe that i could need some more helps in the future cause i am new to these machines. :88- We have quite a few members who will be able to help you with your Wms550/360, so just post anytime you have an issue or a question. I had only asked if you were a ham because of your chosen member name. Enjoy the forum. :89- |