|
Title: BALLY E-SERIES 2284 LIGHT PROBLEMS Post by: mmurphygolden on September 03, 2009, 12:31:58 AM I AM BRAND NEW TO DOING THIS. I HAVE A BALLY E-2284 THE LIGHTS WHEN I BOUGHT IT ALL WORKED . BUT NOW AFTER REPLACING ONE OF THE BULBS THE TILT LIGHT,COIN ACCEPTED ,AND THE 1ST COIN 2ND COIN 3RD COIN ON TOP DONT WORK CHECKED ALL FUSES AND BULBS THERE FINE. I DONT NOW WHAT I DID. FIRST MACHINE. HELP PLEASE.
Title: Re: BALLY E-SERIES 2284 LIGHT PROBLEMS Post by: MarkInAz on September 03, 2009, 01:50:29 AM Hi & welcome to NLG.
You didn't say if the rest of the machine is working. Is it? All those bulbs run off of 6 VAC. First off, double check your fuses again. Check them with an ohm meter and make SURE they are good. Double check everything you have touched or bumped, and make sure the many big white wire connectors are in tight. If you don't find the problem let us know & we'll go deeper. Good luck. Title: Re: BALLY E-SERIES 2284 LIGHT PROBLEMS Post by: FOXSSLOTS1 on September 03, 2009, 09:26:25 AM check the sockets themselves where you changed the bulbs - the socket may be shorting against the cabinet - and pull out the bulbs you replaced - a bad bulb can cause problems as well.
Title: Re: BALLY E-SERIES 2284 LIGHT PROBLEMS Post by: dpalmi on September 03, 2009, 06:10:09 PM Dan #2
|