|
Title: Wired up of progressive Post by: clongames on September 03, 2009, 11:24:04 PM Hello, it(he,she) wanted to know that signs take every cable that there goes out of the card mother of a machine IGT.
I want to prove(try) manually the increase of the well, this way like resetear the progressive one, as if it(he,she) was with the machine. The controller is a CON2 - V4.01. I wait could help me with an explanation Title: Re: Wired up of progressive Post by: clongames on September 03, 2009, 11:28:23 PM I want to know if there can be done these tests(proofs) that the figure says and that cables are.
That color is the common one, the jackpot and who is the coin in Title: Re: Wired up of progressive Post by: clongames on September 04, 2009, 10:55:23 AM brown=?
blue=? white =? Title: Re: Wired up of progressive Post by: brichter on September 04, 2009, 03:52:31 PM Not sure I understand fully what you are looking for here, but the top picture is mine.
I do not have that cable connected to a CON2, I have it connected to a CHAMII+, here is the harness diagram. the picture shown is the connector at the S+ motherboard. <edit> I also found the pinout for the CON2I brown= Jackpot/Coin In blue= Common white =Serial Return Title: Re: Wired up of progressive Post by: clongames on September 04, 2009, 09:25:45 PM :131-
brown= Jackpot/Coin In, If I connect it with the common one they increase the coins in the display blue= Common white =Serial Return, That sign flows for terminal this one. A help, since these signs work Title: Re: Wired up of progressive Post by: Neonkiss on March 08, 2010, 11:29:05 PM Not sure I understand fully what you are looking for here, but the top picture is mine. I do not have that cable connected to a CON2, I have it connected to a CHAMII+, here is the harness diagram. the picture shown is the connector at the S+ motherboard. <edit> I also found the pinout for the CON2I brown= Jackpot/Coin In blue= Common white =Serial Return I know this is an old thread, but I have a question. I'm using the CHAMII controller and power supply in a S+ machine. I have the 311-205-31 connector cable. The one end goes to the CHAMII+ J7 connector, The other end (Machine end) is suppose to connect to the J12 connector. Is this the J12 connector on the motherboard? That J12 is a 4 pin connector that is much larger than the small 6 pin connector of the cable. Title: Re: Wired up of progressive Post by: coorslight115 on March 08, 2010, 11:51:35 PM Not sure I understand fully what you are looking for here, but the top picture is mine. I do not have that cable connected to a CON2, I have it connected to a CHAMII+, here is the harness diagram. the picture shown is the connector at the S+ motherboard. <edit> I also found the pinout for the CON2I brown= Jackpot/Coin In blue= Common white =Serial Return I know this is an old thread, but I have a question. I'm using the CHAMII controller and power supply in a S+ machine. I have the 311-205-31 connector cable. The one end goes to the CHAMII+ J7 connector, The other end (Machine end) is suppose to connect to the J12 connector. Is this the J12 connector on the motherboard? That J12 is a 4 pin connector that is much larger than the small 6 pin connector of the cable. Yes , refer to the top picture 2 posts above. 3 wires are needed and they goto J12 on the Motherboard not the removable MPU board. It is a larger style connector. I made my own using 3 individual wires with insulated connectors (heat shrink) could not find a plug that fit. Title: Re: Wired up of progressive Post by: Foster on March 08, 2010, 11:57:48 PM If you have a 6 pin connector. how many wires are in the connector?
I suspect if it black 6 pin connector with a locking tab it is for the S2000, Vision, Game King, I -game etc. Title: Re: Wired up of progressive Post by: Neonkiss on March 09, 2010, 12:22:56 AM If you have a 6 pin connector. how many wires are in the connector? Foster, you must be correct. Yes it's the small flat 6 pin connector with the locking tab.I suspect if it black 6 pin connector with a locking tab it is for the S2000, Vision, Game King, I -game etc. I'll look for the correct cable needed. K+ to ya... |