|
Title: Bally hopper conversion $1 to .05 cents Post by: coinopshop on September 04, 2009, 11:29:30 AM Hello all.
Again as I am new to the slot repair world, what parts ( part #'s ) do I need to convert my $1 coin hopper to a nickel hopper ? Does anyone have these parts for sale ? I have a Bally 5000+ machine. Thanks in advance. Title: Re: Bally hopper conversion $1 to .05 cents Post by: jay on September 04, 2009, 02:03:46 PM In general terms:
Denomination sticker Coin Head Change of the Coin Compartior from a CC-33 to CC-16 Wiring Harness for the CC-16 (same connectors but different pins are in use than the CC-33). Spacer guides for the optics Shelf Wheel for the hopper Title: Re: Bally hopper conversion $1 to .05 cents Post by: StatFreak on September 04, 2009, 02:18:33 PM In general terms: Denomination sticker Coin Head Change of the Coin Compartior from a CC-33 to CC-16 Wiring Harness for the CC-16 (same connectors but different pins are in use than the CC-33). Spacer guides for the optics Shelf Wheel for the hopper add: pin wheel for the hopper What about a small coin hopper knife? (Are the knives really that different? They never seemed so to me.) Title: Re: Bally hopper conversion $1 to .05 cents Post by: coinopshop on September 04, 2009, 03:02:36 PM I have already adjusted the Coin Mech and it accepts .05 perfectly. I'd would just need the Wheel Shelf and Pin Wheel then ? Is that any 16 Pin Wheel ?
Anyone know the part #'s for both ??? Can I order them from Happ Controls ( the ones on their website ) ??? What is the difference between a Shelf Wheel with lip vs. one without ? Sorry for all the multiple questions. Thanks again, Dave. |