New Life Games Tech Forums

Hi,

I've bought a backlit reel kit and Installed it in my S2000. (international version)
I've used a 5 reel harness and put a looped plug in the last 2 reel openings (it's a 3 reel game).
When I hooked everything up, it goes (after starting up) to a reel 1 tilt. The reels 1 and 2
do have power, can feel that with my hand trying to move the wheels, no resistance).
With the self test all 3 reels seem to power, short shake, but only the 3rd reel spins!
Wwird thing is that only the 3rd reel spins. I can't clear the tilt. I've allready done a clear, doesn't
solve the problem as well. Does anyone have an idea on how to fix this or what could be wrong?
When I remove the plug from the main board to the backlit reel controller it works again.

Thanks,

Jeroen

Do you have the harness plugged in the J-4 slot on the backlit controller board.  If you do I would try removing it