New Life Games Tech Forums

Hi all dear friends,
 Do anyone know why when I ram clear a atronic cashline and tried to setup the progressive it says option not used? I have the dip switches on correct position on the communication board or I think I got it correct.lol! Does clowning around has progresive? Maybe thats my problem, some of them has no progressive as far as I heard. Any ideas or any help? Thanks.

If you cant answer my questıon maybe you can help me wıth a manual for atronıc cashlıne. I had some ınformatıon where ıt show the maın board sound board and communıcatıon board, however the communıcatıon was shown on that was dıfferent than the one I had. Thats why I was askıng maybe a manual explaınıng those dıp swithces. Thank you once gain.

Sorry,cant help on the prog. :5- But check the file sec. and see if this is what you need  :89-

Hello Eko

Was the machine on a progressive before ?. Dont think all games have progressive support - Whats your game theme.
Assume you are talking about APL (Atronic Progressive Link). You will need to program the master machine with the Atronic progressive SW using a laptop/pc. For the sw to work you will also need a dongle.

Regards
Ian

I am not sure ıf It was progressııve before because the machınes are already used and recently came to our casıno. And thank you for the hınt but I am aware of the dongle and the computer setup. However; my problem ıs when I trıed to setup the machıne progressıve, ıOptıon not used appears. The machıne ıs set to be stand alone progressıve. Any ıdeas? Oh, before I forget I have Bıg BLue Bucks and Clownıng around and I get thıs message on both. Actually what makes me think is we have other Big Blue Bucks and they have progressıve...What you think? Thanks.

Hello EKO

Assuming you are in the USA ?. If you are a casino employee you should not have a problem registering on the Atronic website or your management should have this - You can look up the relevant game in the gamebook to see if it supports progressive. The only other thing that i think that it could be is that the commboard is not enabled. After a full clear there is an option where you have to set the machine to work with a commboard.

Regards
Ian

He's not, he's in Belize. It's in his profile. :89-

Thanks Stat - I actually checked the profile and still missed it  :25-
EKO - Let me know what number are printed on the EPROMS and i will see what i can do.