New Life Games Tech Forums

**Video Slots** Gaming machines => IGT I-Game and Game King. => Topic started by: SAT (aka GANDHI) on September 14, 2009, 11:48:34 AM



Title: Game King to Game King Enhanced upgrade
Post by: SAT (aka GANDHI) on September 14, 2009, 11:48:34 AM
Hi people good morning

Im currently upgrading some game kings to the new 044 board and I have nearly all of the parts needed....  I just need to find out the harness to connect the I/O board because the I/O used by the machine is really old.

I would appreciate if somebody can give me a hand with a wiring diagram of that harness in order to build it myself, or a or a sales price for at least one to complete my tests...........  

The parts I have:

- New 044 processor board

- Game (the little board with all the surface mount ICs containing the game itself PN: 76828601)

- New I/O board (PN: 75427802)

- Game King Deluxe motherboard (PN: 75908800W)



What I need:

- IGT Harness Button to I/O Board #HARN J60783101 (see attached picture)


Thanks in advance!

SAT (aka GANDHI)


Title: Re: Game King to Game King Enhanced upgrade
Post by: jay on September 14, 2009, 12:05:18 PM
Been a while since we saw you on board, good to have you back.....


Title: Re: Game King to Game King Enhanced upgrade
Post by: SAT (aka GANDHI) on September 14, 2009, 12:20:37 PM
Been a while since we saw you on board, good to have you back.....

Thanks Jay!!!  nice to see you too my friend, best regards!


Title: Re: Game King to Game King Enhanced upgrade
Post by: TZtech on September 14, 2009, 04:59:02 PM
Hello Sat

Is it for a slant top machine ?
Good luck building it - See attached.

Regards
Ian


Title: Re: Game King to Game King Enhanced upgrade
Post by: SAT (aka GANDHI) on September 14, 2009, 07:03:03 PM
Hello Sat

Is it for a slant top machine ?
Good luck building it - See attached.

Regards
Ian


Hey TZ, thanks a lot man... this is what I was looking for!!!!    Now I'll have a nice soldering session :D

It's for a 19" upright BTW,

Thanks again


Title: Re: Game King to Game King Enhanced upgrade
Post by: TZtech on September 15, 2009, 09:42:17 AM
Hi Sat

Just make sure its the correct harness before you start soldering. Accoring to my info this harness is for a slant. No sure if upright is the same.

Regards
Ian


Title: Re: Game King to Game King Enhanced upgrade
Post by: SAT (aka GANDHI) on September 15, 2009, 04:42:20 PM
OK Ian; I will, thanks mate, greetings from caribean's pearl ;)