|
Title: Question about IGT power supply??? Post by: rotornaut on September 16, 2009, 03:18:06 PM I have recently been learning how to rebuild various power supplies. I have found that usually just replacing all the caps on the board does the trick. However lately I have had a few that will not come all the way back to life after replacing all the caps. More specifically, the machine powers up (all lights, bv, printer etc.), but it is staying in netplex failure. If i switch the supply with a known good one it works as advertised. My question is what part of the supply board should i focus on to remedy the netplex issue. Thank you for any help.
Title: Re: Question about IGT power supply??? Post by: stayouttadabunker on September 16, 2009, 04:54:09 PM Which power supply are you talking about specifically?:128- :129- :103-
There are many different kinds for different platforms... IGT made a bunch of different kinds of machines. Title: Re: Question about IGT power supply??? Post by: rotornaut on September 16, 2009, 05:00:50 PM It is for an S2000. Probably an after market replacement. 3Y CP-9826. I actually fixed it, or it works in a different game than orighinally tested on.
First I tore it back down checked all solder joints touched up a couple on the output just cause they looked a little funky (most likely ok). Then I removed IC4 metered it (was ok too) reinstalled IC4 and assembled power supply. I tested in a different S2000 (3 reel instead of 5) and works fine still in game working. Was it because of the extra 2 reels maybee? Title: Re: Question about IGT power supply??? Post by: dpalmi on September 16, 2009, 05:58:07 PM Hello!
I assume you are talking about the power supply behind the reels - this has been talked about before here - check out this post for some more info... http://newlifegames.net/nlg/index.php?topic=1885.msg13769#msg13769 (http://newlifegames.net/nlg/index.php?topic=1885.msg13769#msg13769) Dan #2 Title: Re: Question about IGT power supply??? Post by: rotornaut on September 16, 2009, 06:04:00 PM Thank you that is helpfull. Exactly what I was having trouble with.
Title: Re: Question about IGT power supply??? Post by: jdkmunch on September 16, 2009, 10:32:03 PM The great thing about this site is that it's like a living encyclopedia - 99% of all common slot problems have been documented and have remedies. And then there is the Devils and Diamonds slot. lol
That kit is not long for this world. Title: Re: Question about IGT power supply??? Post by: stayouttadabunker on September 16, 2009, 10:36:29 PM Rotornaut,
It's very good that you posted your fix for the PS... :89- :3- That will help us and other NLG'ers in the future! Title: Re: Question about IGT power supply??? Post by: kilowatt305 on October 23, 2012, 03:40:19 PM does anyone know how to power-up the WP206F11 power supply, at the bench, without using the motherboard? any info will help. thanks in advance.
Title: Re: Question about IGT power supply??? Post by: Buzz on October 23, 2012, 04:10:55 PM http://newlifegames.net/nlg/index.php?topic=1988.msg14955#msg14955 (http://newlifegames.net/nlg/index.php?topic=1988.msg14955#msg14955)
Reply #15 |