|
Title: Bally 5500 error Post by: CVslots on September 17, 2009, 12:30:54 AM I've got 2 Bally 5500's and both had a 81 code on them, I changed the batteries an did a ram clear with the chips and I'm getting all 9's flashing on the displays :103-
Title: Re: Bally 5500 error Post by: mgobyman on January 03, 2010, 09:31:09 PM What did you find out about the 9999 flashing?
Title: Re: Bally 5500 error Post by: mgobyman on January 03, 2010, 09:31:50 PM Same problem here, this is why i ask.... Anyone HELP
Title: Re: Bally 5500 error Post by: jdkmunch on January 03, 2010, 10:08:54 PM Are you sure they cleared correctly? Displaying CLC?
Title: Re: Bally 5500 error Post by: jdkmunch on January 03, 2010, 10:15:47 PM I looked up tilt 99
"An error has been detected with the MPU board. A diagnostic self check has determined that memory is uncorrupted. The error is recoverable." Title: Re: Bally 5500 error Post by: mgobyman on January 04, 2010, 12:41:35 AM So now what do i do? new board?????
Title: Re: Bally 5500 error Post by: paul on January 04, 2010, 01:56:04 AM go back and do a clear and make sure you get a CH-C then a CL-C
Title: Re: Bally 5500 error Post by: StatFreak on January 04, 2010, 06:39:34 PM And make sure that your battery is still in good shape, first. Bally ProSlots eat batteries like candy when compared to other slots.
Title: Re: Bally 5500 error Post by: paul on January 05, 2010, 12:45:13 PM Has anyone come up with a battery solution for Bally :79-
Title: Re: Bally 5500 error Post by: mgobyman on January 06, 2010, 02:24:58 AM I'll go back and check voltage on the hub battery, i bought the battery from Fry's Electronics. Soldered it on, let the system run and then proceded into the reboot. All 99999. With removing the chips, one pin broke off into the hole. have to remove and restart again. What a pain in the arse! Hopefully, i will get this machine back in order. We miss the fun!
|