|
Title: Power to display Post by: jstraa on September 28, 2009, 08:21:31 PM Hi,
Somehow my power wires to the display got out of the connector I thought the red wire goes right and the black left (viewing from behind) can anyone post a picture or confirm this? It's a CHAMII + Thanks, Jeroen Title: Re: Power to display Post by: Ron (r273) on September 29, 2009, 12:59:55 AM Hi, Somehow my power wires to the display got out of the connector I thought the red wire goes right and the black left (viewing from behind) can anyone post a picture or confirm this? It's a CHAMII + Thanks, Jeroen Here are both ends on a IGT S2000 hook up. Ron Title: Re: Power to display Post by: stayouttadabunker on September 29, 2009, 03:03:32 AM EXCELLENT pictures r273! :3- :3- :3-
Title: Re: Power to display Post by: jstraa on September 29, 2009, 04:37:10 AM Thanks this helped ! :) I think I will try to solder it to the connector this time.
Title: Re: Power to display Post by: stayouttadabunker on September 29, 2009, 12:59:43 PM May I ask?
What are the round magnets for on the wires sometimes? Especially twisted wires that have VAC running through them? I noticed them quite often on fluorescent wiring... :129- Title: Re: Power to display Post by: brichter on September 29, 2009, 02:01:12 PM They are ferrite RF chokes, not magnets, and they are there to eliminate EMI/RFI so the display doesn't pick up any unwanted signals.
Title: Re: Power to display Post by: stayouttadabunker on September 29, 2009, 03:16:25 PM They are ferrite RF chokes, not magnets, and they are there to eliminate EMI/RFI so the display doesn't pick up any unwanted signals. Cool! You learn something new everyday... or at the very least, refreshed my "knowledge" from CRS... :97- Thank you brichter! :89- Title: Re: Power to display Post by: jstraa on September 29, 2009, 07:34:01 PM Ok I just left that thing out LOL so put that in again !
|