New Life Games Tech Forums

I made a new top box speaker harness, Since the one in the machine had the speakers wired in series.
My harness has speaker A connections going to one speaker and speaker B connections going to the other speaker.

I was going to to install the Amp board but decided it could be too loud on lowest setting.
I have Multi Media Lite 2 installed with DSV 42
I did set MMLB to stereo output.

I thought the MMLB sound test are for stereo output.
I see one letter of each tone change from like l to r depending which tone I select but sound still comes out of both speakers

MMLB Index=193 ID=400086 smart4l    <- I would guess that means left channel.
MMLB Index=194 ID=400087 smart4r    <- I would guess that means right channel.

Is there something else I need to change besides that could have been overlooked?

I don't know if I can help you on your question Foster but
what about the speaker in the coin tray?
I wonder if that is included?

I am not lucky enough to have a speaker in the coin tray yet.

Another thing I forgot to say is that I gained some volume by connecting each speaker to its own output. I figured that would happen.

Once you get the coin tray subwoofer your volume will double, it'll be so loud on 1 even with resistors inline that you can't stand it

And a video demonstration

http://www.youtube.com/watch?v=ab-4K7ZrKu0 (http://www.youtube.com/watch?v=ab-4K7ZrKu0)

You need a three line reel glass man! :89- :96-

I corrected your post. :96- :88-


Brianzz, thanks for the video. The increase in volume certainly overloaded your microphone, but I'd probably like the extra bass if I had one of these machines. I would think that you could always get higher-valued resistors to lower the volume further if necessary. :128-

Yeah the 5 line wide glasses are evidently pretty hard to find