|
Title: cc16D will intermittently take coins Post by: bkoch on October 10, 2009, 04:29:31 PM The Problem started with the machine taking one coin and not another. I changed the comp and it worked for a wile then would stop taking the coins. Now it just will not take any coins.
I have a IGT I game. I tried to replace the coin comp, optic, I/O card and harness with known good one's yet the machine still does not want to take coins. Does anyone have a suggestion as to where to start? Thanks Blake Title: Re: cc16D will intermittently take coins Post by: bkoch on October 10, 2009, 10:20:49 PM I wiggled the harness behind I/O card and machine started taking coins again does anyone have a wiring diagram for this area. It's the I/O card in the main body.
Thanks Blake Title: Re: cc16D will intermittently take coins Post by: stayouttadabunker on October 10, 2009, 11:35:50 PM Thanks for reporting what had happened. :3-
Posts like this will help people in the future! I have the honors of giving ya your first kudos! Title: Re: cc16D will intermittently take coins Post by: slot monkey on November 11, 2009, 01:50:55 AM bkoch
Thanks for the post, it worked for my intermittent coin comp. + karma to you Bunker, you must be a fortune teller :89- Title: Re: cc16D will intermittently take coins Post by: stayouttadabunker on November 11, 2009, 02:18:22 AM :72- I know a good post when I see one... :89-
bkoch, You were asking about a harness/wiring schematics... may I ask, what model/make of machine would you want these for? I may have a copy for ya? Title: Re: cc16D will intermittently take coins Post by: bkoch on November 11, 2009, 03:26:41 AM Thanks Buncker
The machine is Igt 17 inch round top made in 9/00 with a 19 pin monitor model number 69419000. The wiring in question is right where the back of the I/O card is in the main body. there are two one right next to the other. Blake Title: Re: cc16D will intermittently take coins Post by: Bettor Slots on November 11, 2009, 04:41:08 AM Quote I wiggled the harness behind I/O card and machine started taking coins again does anyone have a wiring diagram for this area. It's the I/O card in the main body. Thanks Blake I have seen many instances where the molex connection within the metal housing is not fully seated. It often comes lose while the machine is being moved around. I would suggest that you remove the metal housing and study the connection inside, I would bet it's a little loose on one end or the other. Title: Re: cc16D will intermittently take coins Post by: stayouttadabunker on November 11, 2009, 12:26:05 PM It's a 16" RT (We normally call them 16"RT or 9"Choptop) IGT video game machine...
Is it a I-Game, Game Maker, Game King, Vision, some kind of poker or Keno machine? I wish I had a list of model numbers but I don't. There are quite a bit of different video machines IGT made. I've collected a few manuals and schematics over the years but as far as model numbers... I don't have that list so I can't match up a schematic to model number 69419000. How about the I/O board, are there numbers on that? |