|
Title: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: John0813 on October 10, 2009, 06:13:37 PM I have an IGT S2000 SuperSpin Sizzling 7 Machine.
When I went to turn it on today...... the following Problem developed: The machine starts up....and reads: Display passes self test...... Please wait..testing memory (10-15 seconds) Waiting for Netplex Devices (1 second) THEN ALL THE REELS TURN ONE SYMBOL DOWN.... Nothing happens for 2-3 seconds and then the machine repeats the above process...over and over and over again. I tried to use the Operator/Attendant Key but I can not get into the menu..... DOES ANYONE KNOW WHAT TO DO????? The manual does not provide an answer...any help is appreciated... JOHN0813 Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: Railroad94 on October 10, 2009, 07:35:20 PM For starters I would pull and re-seat all reels and cpu and check all plugs.
Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: Bettor Slots on October 11, 2009, 12:37:00 AM And after that, power it back on, let it cycle again, and when it gets to point right before it wants to cycle again, open the door and turn the jackpot key one time....close the door
Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: John0813 on October 11, 2009, 10:48:39 AM Guys....I tried both suggestions...the problem continues...any other ideas???? John 0813 Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: Railroad94 on October 11, 2009, 11:07:42 AM Unplug your BV and printer and see if those devices are pulling it down. Do you have another machine? if so i would try a board swap and power supply swap
Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: Bettor Slots on October 11, 2009, 01:54:07 PM Quote Unplug your BV and printer and see if those devices are pulling it down. Do you have another machine? if so i would try a board swap and power supply swap Yessir, that's a good way to go at it. One of the netplex devices might be pulling it down.....or may be one of the power supplies that has partially failed, and if it is it is likely the one behind the reels if it is. Title: Re: IGT S2000 Problem...Solution Needed....Help... Post by: Railroad94 on October 11, 2009, 02:42:16 PM If all fails and last resort find some time,six pack and a ram clear chip :8-
Title: Re: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: John0813 on October 11, 2009, 04:20:21 PM I put in another board.....received a mismatch error message...then was able to use my reset key...turned off the machine...replaced the old original board and turned the machine on....everything worked as normal.... DOES ANYONE HAVE ANY IDEAS WHAT CAUSED THIS PROBLEM....Is this a temp fix?? Was it a bad board? or Power supply?? or Bad Battery??? Any ideas would be appreciated. As Always...Thanks for your help... John 0813 Title: Re: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: Bettor Slots on October 11, 2009, 04:33:53 PM :3-
Could be a weakness in the main battery and for the cost would not hurt to replace it. Could also be a failing board. Take a look near the larger green battery to the back left and look for any white residue. I have found many of these to be leaking and cause problems on the boards circuitry. Title: Re: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: John0813 on October 26, 2009, 06:31:43 PM IT WAS THE BATTERY....Thanks. Title: Re: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: stayouttadabunker on October 26, 2009, 06:33:14 PM To hear you solved the problem is well,....FANTASTIC! :3-
Title: Re: IGT S2000 Problem...Solution Needed....Help...SOLVED!!! Post by: StatFreak on October 27, 2009, 12:15:53 AM John, thanks for posting the cause. It may help another member in the future. K+ :71-
|