|
Title: bill val Post by: john7dee on October 17, 2009, 01:13:35 PM dbv 145 sg bally 5500
wiil not accept any bills at all when turned on i do not hear it going thru it's cycle gren light is on checked wiring - all looks good no light on val. ty john Title: Re: bill val Post by: StatFreak on October 17, 2009, 08:25:28 PM ... gren light is on ... no light on val. ... Which green light is on? Is the "coin mech" switch on the front of the MPU board tray turned on (up position)? Title: Re: bill val Post by: john7dee on October 18, 2009, 01:34:35 AM yes the switch is in the up position
green light that shows that the bv is powered up----there's 2 lts 1-red/ 1-green (square) just below the val. on the outside john |