New Life Games Tech Forums

* Support for WAP, WAP2 and I-mode protocols.
    * Browse through boards/topics/messages with reduced page size.
    * Ability to login and logout (not with WAP).
    * Ability to see new topics/boards with new replies.
    * Ability to jump to first unread reply.
    * Ability to Post new messages (not with WAP).

Add one of the following after index.php in the address:
?wap2
?wap
?imode

That will bring up the mobile pages   :3- :3-



Let us know how you are using it  :5-

Enjoy:  :89- Joeylc

Wireless Device Support

Some mobile devices have the ability to connect to the internet (using GPRS, 1X, HSDPA, etc.); however, mobile devices are most often not equipped with advanced browsers like desktop computers. Therefore, only a limited set of HTML is supported, defined by several mobile internet protocols. NLG supports three protocols commonly used by wireless devices: WAP, WAP 2, and i-mode.

NLG Feature Support  :88-

The following features are supported:  :3-

Feature   WAP WAP 2 I-mode
Display boards and categories         WAP WAP 2 I-mode
Display topics and posts            WAP WAP 2 I-mode
Login and logout                     WAP 2 I-mode
Distinguish new/read topics          WAP 2 I-mode
Create and Reply to topics          WAP 2 I-mode
Read and send personal messages     WAP 2 I-mode
View unread posts since last visit     WAP 2 I-mode
View new replies to your posts        WAP 2 I-mode

You can only login with WAP 2  or I-mode  :5-

Please consult the manual for your wireless device to see which protocol or protocols it supports.

Usage

NLG support of wireless protocols is always enabled.
The WAP, WAP 2, and i-mode protocols can be accessed by adding
?wap, ?wap2, or ?imode respectively to the forum's URL. For example:

* http://newlifegames.net/nlg/index.php?wap (http://newlifegames.net/nlg/index.php?wap)
* http://newlifegames.net/nlg/index.php?wap2 (http://newlifegames.net/nlg/index.php?wap2)
* http://newlifegames.net/nlg/index.php?imode (http://newlifegames.net/nlg/index.php?imode)


An automatic detection of the protocol is attempted. Entering the Forum URL without any parameters should be sufficient to show the Forum in the proper protocol.