|
Title: Bally 6000 wba13 problem Post by: stormrider on October 26, 2009, 11:00:40 AM I picked up a unshopped S6000 had a few error codes which I cleared
came with a printer and wba13 no hopper or coin mech so my last problem seems to be the original wba 13 was missing wire harness and plug on left side so I pulled a working wba13 from another 6000 now the game starts up reels spin wba 13 cycles but does not light up with green arrows.There is power to it as I can see the 2 orange leds lit up dip switch is set # 2 on, as this was what worked on the other 6000 that is working anybody help out on this ? Thanks. Tim Title: Re: Bally 6000 wba13 problem Post by: stormrider on October 26, 2009, 02:26:53 PM Did another ram clear to be sure also all dips on wba 13 set to off
Machine starts up fine wba 13 cycles then NO green lights no errors on the display can't figure this one out :25- Title: Re: Bally 6000 wba13 problem Post by: Bettor Slots on October 26, 2009, 05:11:11 PM Take a look at the MPU and make sure the switch hidden behind the bar and between the Pseudo Coin and Test buttons is in the up position as shown in this picture.
Title: Re: Bally 6000 wba13 problem Post by: stormrider on October 26, 2009, 05:46:34 PM Jim,
That was it :3- :3- :3- I can't believe that was the problem I thought it was only needed to be in the up position it you had a coin mech since this is coin less I ruled it out in my head :25- K + Thanks. Tim Title: Re: Bally 6000 wba13 problem Post by: a69mopar on November 05, 2009, 12:21:35 AM This is a very common mistake, a lot of people with perfectly good working machines turn this off then dont think about it when the BV doesn't work.
W |