|
Title: Validator problems Post by: HOGCAT on October 26, 2009, 07:38:23 PM New guy here!!!! Been reading for a couple days. Took the assembly out and cleaned it. Every thing else on the machine works fine. I am sure its a IGT S-Plus. It has the 4th of july game and is a 25c machine. Here is what the validator does (or does not do!!!)
http://smg.photobucket.com/albums/v311/hogcat/?action=view¤t=DSCN0595.flv (http://smg.photobucket.com/albums/v311/hogcat/?action=view¤t=DSCN0595.flv) If you listen you can hear the noise it makes. The whirring nose is the camera, but the ker-chunk click is what the noise is coming from the validator. I have a clear & set chips coming soon. I hope that fixes it!!! (http://img.photobucket.com/albums/v311/hogcat/DSCN0596.jpg) (http://img.photobucket.com/albums/v311/hogcat/DSCN0597.jpg) (http://img.photobucket.com/albums/v311/hogcat/DSCN0598.jpg) I hope its not serious!! Thanks for any help!!! GARY Title: Re: Validator problems Post by: HOGCAT on October 26, 2009, 07:41:00 PM Here is a overall pic of the machine.
(http://img.photobucket.com/albums/v311/hogcat/DSCN0599.jpg) Title: Re: Validator problems Post by: Foster on October 26, 2009, 08:23:14 PM I suspect the transport is not fully engaged with the cash can.
Loosen the two thumb screws a little. Then reach back to the back of the transport and press it down. Tighten the thumb screws. Title: Re: Validator problems Post by: HOGCAT on October 27, 2009, 11:46:04 PM Nah, that did not fix it. But thanks for the tip!!!! I have a clear and set chip coming. Might be the battery dead so long, the validator needs resetting.
GARY Title: Re: Validator problems Post by: HOGCAT on November 07, 2009, 07:18:11 PM FIXED!! It was the transport assembly!!!
|