New Life Games Tech Forums

 :59- My ballys gamemaker multi game touch screen machine is showing ( main saferam fail ) (back up saferam 1: fail)(back up saferam 2: fail ) This is after I have installed a new battery.And from looking at the repair log in NLG I'm thinking I need a clear chip.Can you tell me the correct clear chip that I need? ,and where can I buy one?And what do I do with it when i get it ?  Thank you NLG users

You can buy a clear chip from one of our vendors. There is only one for the GameMaker V7000/7200. The clear chip needs to be inserted into P10 (you remove the game chip that is there). You then turn on SW1 Dip switches 7 and 8, insert the board and power up the machine.

There are several settings to go through, and they vary depending on your Mains. I have attached a basic set of instructions -- you will have to follow the prompts as they come up on your machine and they might not be exactly the same or in the same order as those printed here. Once all of the initial settings are competed, you power down, replace the clear chip with the game chip in P10 and turn off DIP switches 7 & 8.

William, Hello and welcome to NLG! You can contact many of the vendors at the upper portion of the forum page in the sponsor section for your needs. I have dealt with Jim at Blueridge Slots and have never been disappointed. I have also included a step by step total clear procedure for the gamemaker below. Just right click on the document and choose "Save as" and pick a spot on your computer and it will transfer the file to that location. Or just double click the document and it will open to read. Hope you get that GM up and running soon!

 Dan (tacman)

Ooops, Stat beat me to it!

Thank you very much for all the info.You have been very helpful. Thanks again. :3-

William, is your machine up and running?

For reference, the clear chip is numbered V7S-1000 Clear.