Title: igts2000 crystal 7's round top manual needed Post by: smselby on November 05, 2009, 01:26:17 AM I recently got a IGT S2000 RT slot machine, I'm looking for instructions describing what I'm looking at when I open it, how to access the attendant menu and what the procedures are when i want to take out a circuit board to see the the Eprom chip # is. ( I would lke to change the % payout)
Any help would be greatly appreciated. thanks, Title: Re: igts2000 crystal 7's round top manual needed Post by: a69mopar on November 05, 2009, 02:51:22 AM Take a lok in the submit file section, I believe some manuals are in there. http://www.newlifegames.net/uploads/up/upload.php (http://www.newlifegames.net/uploads/up/upload.php)
Thanks, Wayne Title: Re: igts2000 crystal 7's round top manual needed Post by: Bettor Slots on November 05, 2009, 05:01:18 AM Quote ( I would like to change the % payout) In order to do this you will be needing a Key 17 Chip. If you want to change the denomination, change it to be Multi-denominational, or enable the printer, you are also going to need a 097 Clear Chip. Title: Re: igts2000 crystal 7's round top manual needed Post by: smselby on November 07, 2009, 01:25:13 AM thanks for the info, so i need to find the key 17 and 097 chip?
any ideas as to where that is found? and then the million dollar question, without a manual, where do I insert the chip(s) I looked in the upload section for a manual, I didn't see anything that resembles what I need. help ??? Title: Re: igts2000 crystal 7's round top manual needed Post by: PWRSTROKE on November 07, 2009, 01:36:08 AM No pun intended here but based on past "activities" here I would suggest pick a vendor here (from top listing) and pm them with your needs or check on e-bay. The vendors here may have some orginal manuals or key chips I think you had asked for -It does not hurt to ask. B.
Title: Re: igts2000 crystal 7's round top manual needed Post by: Bettor Slots on November 07, 2009, 01:44:52 AM PM sent.
Title: Re: igts2000 crystal 7's round top manual needed Post by: a69mopar on November 07, 2009, 07:02:24 PM I looked in the upload section for a manual, I didn't see anything that resembles what I need. help ??? The 03_Section_2_Program_Software_Menus.pdf is in there, others may be also. W |