|
Title: What model draw poker is this? Post by: Ronbo on November 17, 2009, 08:21:19 PM Hi Guys,
I bought this machine and not sure what it is. After researching on the web and talking to the fantastic folks on this forum I've found out it's not a fortune or a PE it does have only one card in it. It was made in 1987 the assembly number on the board ends in 2600 and was made my IGT. The card mounts on the back wall behind the hopper. Anyone have an idea? Title: Re: What model draw poker is this? Post by: tacman on November 17, 2009, 09:28:30 PM What does it say on the blue plate on the bottom left of your 2nd picture?
Dan (tacman) Title: Re: What model draw poker is this? Post by: Jim on November 18, 2009, 01:39:22 AM What you have is just a plain simple PE board that goes in a PE poker machine,and mounts to the back wall and has two plug connectors. board # is 75702600 and the board is referred to as a Fortune Three assembly, in the Players Edge Poker Service and Parts Manual.
Jim Title: Re: What model draw poker is this? Post by: Ronbo on November 18, 2009, 06:47:32 AM WOW Jim...you answered something I've spent weeks looking for. :3- The problem I ran into is buying another card....All the PE boards I've seen don't have just 18 pins on J2 they have 52. The model number on the inside is 1070C. Jim is it possible to get a copy of the manual your looking at?
THANKS Ron |