|
Title: Bally 6000 MPU Plugs Post by: jdkmunch on November 17, 2009, 10:56:47 PM The jumpers switches on my board have been replaced with solder plugs. Is there somewhere I purchase the switches to replace the plugs??
Title: Re: Bally 6000 MPU Plugs Post by: a69mopar on November 17, 2009, 11:27:19 PM I usually pull them out of bad boards, they are socketed.
W Title: Re: Bally 6000 MPU Plugs Post by: jdkmunch on November 17, 2009, 11:29:45 PM Ohhh so you come across a dead board and pull those out as spares!
that's a great idea. Title: Re: Bally 6000 MPU Plugs Post by: a69mopar on November 17, 2009, 11:32:57 PM Oh yeah, I use what I can from the fried boards. I have had bad dips before that took me a while to troubleshoot, replaced it and back in business.
thanks, Wayne Title: Re: Bally 6000 MPU Plugs Post by: reho33 on November 18, 2009, 01:44:20 PM Sounds good. Now we know. But still need a source.
Title: Re: Bally 6000 MPU Plugs Post by: Tilt on November 21, 2009, 02:01:25 AM Sounds good. Now we know. But still need a source. I bought some from mouser.com Part number is 506-ADE0804. They cost $1.37 each. (http://) Title: Re: Bally 6000 MPU Plugs Post by: slots of fun on November 21, 2009, 12:00:59 PM John has some on E-BAY at this time look for RUDYS deals. Ron..........(SLOTS OF FUN)
|