|
Title: coin comp.IGT S+ Post by: clown2948 on November 18, 2009, 02:17:03 AM I have some machines that I want to convert to quarters from dollars. The coin comp. has a three wire plug on it. The new cc- 16-D have a six wire plug on the side. My problem is that the three wire will not fit the four wire comp.Do they make a wire to fit the plug on my machine which is three to fit the six wire.Or what must I do to make it work. I have a picture of the wire from my machine also the old comp. Any help would be great. THANKS ALL I HAVE ORDERED THEM APRIL.
Title: Re: coin comp.IGT S+ Post by: clown2948 on November 18, 2009, 02:19:21 AM This is the CC-16-D I want to replace the old one.
Title: Re: coin comp.IGT S+ Post by: stayouttadabunker on November 18, 2009, 04:20:39 AM I recommend getting a new 6-pin harness from one of our vendors on top of the page or
placing a want ad for one in the "Classifieds" section of NLG! Don't use the first top 3 pins! The problem with doing this is that if you get it wrong even one time...you will smell smoke... Look at picture carefully Click on it to enlarge it a little or get a magnifying glass to see what I did to your photo>>> Title: Re: coin comp.IGT S+ Post by: clown2948 on November 18, 2009, 05:47:58 AM Thank You Stayouttadabunker will run ad to se if anybody has them. Thanks Robert
|