|
Title: Help with Bally Series E Slot machine model E2209-28 Post by: jimstol on November 22, 2009, 01:22:16 AM I have a Series E model E2209-28 slot machine. It powers on but thats it. I can release the handle manually and pull it and the wheels will spin but they dont stop. Any suggestions on what I need to do?
Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: Tomba on November 22, 2009, 08:47:09 AM Does it show something on the display and if so, what does it show. There are still old manuals available with even the schematics in it.
Tom Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: jimstol on November 23, 2009, 12:54:18 AM I didnt but I just got a manual and will check it
Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: FOXSSLOTS1 on November 23, 2009, 01:01:08 AM was this a working machine - or did you just buy it as is?
Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: Tomba on November 23, 2009, 04:44:27 AM Check the 48Vac for the solenoids.
Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: jimstol on November 25, 2009, 12:46:59 AM I tried running the test but I get nothing. The bought the machine as is.
Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: Arbiji on November 28, 2009, 09:56:28 PM I just repaired my parents Series E. All lights on, wheels spin freely but won't stop, TILT light on. You don't mention the TILT light, but everything else is the same.
The problem was that a small spring the retracts the solenoid switch after the handle is pulled had detached, keeping the solenoid from operating properly when the handle was pulled. It's inside the chassis on the upper right hand side near where the handle come in. In our case the spring was attached to the lever that actuates the solenoid (which is like in a car - a small cylidner with a plunger the goes in an out), just not attached to the little frame mount sticking out above it. I reattached it and voila, everything worked great. 2 second job. Let me know if you need a picture or something. Title: Re: Help with Bally Series E Slot machine model E2209-28 Post by: jimstol on November 29, 2009, 11:42:06 PM I will check it out and see if its loose. Thanks Ill let you know.
|