|
Title: Multi-Denom button wiring Post by: pinballmike49 on October 10, 2009, 12:23:14 AM S-2000 long glass machine set up for multi-denom with inserts. Vacuum flor. display board uses chip IGT-VFD-00007. CPU board uses version chip IGT VSO11GX1. Stepper GME 1 and 2 uses IGT chips SG000363. Install chips, remove far right button blanking plate and install button switch. Simple wiring harness located under button deck. Do proper game program and your in. Inserts made on the computer look good.
Title: Multi-Denom button wiring Post by: stayouttadabunker on October 10, 2009, 01:28:36 AM Alright!
Good pics Mike and great info to know! :3- Now , all we gotta see is how the button is hooked up under there... :91- Title: Multi-Denom button wiring Post by: CaptainHappy on October 10, 2009, 03:30:53 AM Alright! Good pics Mike and great info to know! :3- Now , all we gotta see is how the button is hooked up under there... :91- Mike, Especially the wiring harness details... Is it labelled with a P/N, if not what are the wire colors? :211- I wonder if alll of the machines are wired with extra wires that you described? I gotta go look! Thanks in advance! :3- :3- :3- CH :95- Title: Multi-Denom button wiring Post by: Railroad94 on October 10, 2009, 11:57:34 AM Did someone say wires
http://newlifegames.net/nlg/index.php?topic=3406.0 (http://newlifegames.net/nlg/index.php?topic=3406.0) Title: Multi-Denom button wiring Post by: pinballmike49 on October 10, 2009, 01:43:16 PM PISSSSSSSS, BLACK WIRE TO RED OR WHITE WIRE TO GREEN ?
Title: Multi-Denom button wiring Post by: pinballmike49 on October 10, 2009, 04:34:14 PM HI, back again. By request the info on the multi-denom button switch wiring found on the s-2000 long glass machine. The wiring harness consist of four wires wire tied and pushed up and behind the coin comparitor. Four wires are black/red tracer...red...yellow/orange tracer...blue/orange tracer. Light bulb circuit uses red and blue/orange tracer wires. Micro switch bottom of switch has center post and uses black/red tracer wire. One post up from the bottom one uses yellow/orange tracer wire. I pulled the switch/light socket down so you can see what this consists off. Railroad94 also has a very detailed write up with pictures on the multi-denom installation. Also I just noticed today that John at Gaming and Electronics Supplies has the IGT GME chips needed for the multi-denom set up. Item number 230364860, buy it now for $5.99.
Title: Multi-Denom button wiring Post by: stayouttadabunker on October 10, 2009, 05:47:15 PM I have it! I have it! Yea! :89-
Now, All I gotta do is stick in a switch, some cool legend and I'm good to go? Right? or do I gotta get some kinda chip? The SG000363 chips? I have those in my machine at the moment. Title: Multi-Denom button wiring Post by: OhioGaming on October 10, 2009, 05:48:30 PM Key 17 to set up your multi-denom.
Title: Multi-Denom button wiring Post by: stayouttadabunker on October 10, 2009, 07:13:18 PM okay,
I got a KEY17 chip...thanks... will set it up in a bit. Title: Multi-Denom button wiring Post by: CaptainHappy on October 10, 2009, 09:06:00 PM Pinball and Railroad,
Thanks for the info, and K+ :3- CH :95- Title: Multi-Denom button wiring Post by: stayouttadabunker on October 10, 2009, 11:05:44 PM Yes,
Those were real helpful to what I was trying to do guys... :3- :3- I'd like to see what is in that little box? ( :81- ....... :96-) Is it a little programmable touchscreen? I mean, if I went the other route of switching denoms on a S2000, how does that little box know the 4 different areas where you touch? Or is it really just a little shadow light box with four bulbs and the denom switching is really triggered by the extra button on the right-most side of the machine? Title: Multi-Denom button wiring Post by: Railroad94 on October 10, 2009, 11:26:31 PM Can a moderator move some of this over or Slotmaster please re post..... Looks like another HI-JACKING of a post is in progress :25- ,sorry
When you use the easy touch,the box is nothing but a box with 4 sections of LED's and i believe it is a pressure sensitive board between the box and reel glass Title: Multi-Denom button wiring Post by: OhioGaming on October 11, 2009, 01:53:04 PM Mark .. You may have to do a full ram clear then the key 17 to get the Multi-Denom to work. My experience is that if the denom needs to be changed I had to do a full clear.. Sorry I just forgot to mention in my last post.
Title: Re: Multi-Denom button wiring Post by: StatFreak on December 04, 2009, 10:21:11 AM MODERATOR: Selected posts split from expired classified thread and moved to S2000 board StatFreak :31- :nlg- Global Moderator |