|
Title: S2000 Lost Sound Simm Post by: cp on December 16, 2009, 01:31:27 PM I have 3 S2000 Tabasco 's . all have the multi media lite board with simm.
Ran into a problem with one machine...was working fine but developed continuous reel tilts .... pulled board from good working Tabasco... insert game board into "problem" machine... machine works fine...reel tilts no more. Grabbed another board off the shelf ... pulled the eproms from the "reel tilt problem" board ...went through complete clear .... game works fine... EXCEPT almost NO sound... with the volume set at 10 you can barely hear it... have to put ear next to spkr. Next, I pull the simm card from good working Tabasco... put it in the multi media board.. good sound... Has anyone ran into losing the sound on simm card ? :103- (no... I didn't mess with the dip switches on simm card ) Title: Re: S2000 Lost Sound Simm Post by: stayouttadabunker on December 16, 2009, 01:37:51 PM I haven't...but doesn't that sound like the DSV card got zapped perhaps?
Static electricity is at it's worst at this time of the year.... every time I sit down, I need to touch something metal or I get zapped myself! Carpeting makes balloons stick to your head a piece of cake right now. Storage of small boards is important so they're protected. Has the volume gotten louder at all when you go into the sound settings on the machine? Title: Re: S2000 Lost Sound Simm Post by: cp on December 16, 2009, 02:42:30 PM Sound setting at 10 (loudest) just barely audible... but the sound is there .
Title: Re: S2000 Lost Sound Simm Post by: stayouttadabunker on December 16, 2009, 03:10:59 PM You need to set it at "11".... :96-
Just for kicks, if you have another machine, I'd try it in that to see if it makes any difference. Basically swapping machines... I don't personally know of any way to repair or troubleshoot a DSV sound card... I'm hoping someone like Bellbenchtech or perhaps channelmaniac might have an inkling on these boards. Try contacting them via PM and see if they have any ideas? |