|
Title: IGT S 2000 PROBLEM Post by: slots of fun on December 25, 2009, 10:51:32 PM Picked up 5 S 2000 games and 2 S 2000 Vision machine for my Christmas . Tryed to get one of the S 2000 up and running after fixing M & B door errors. Now
the reels set up than get the message TERMINAL DISABLED . If i use the key switch goes to the accounting ,history,i/o test. If i open the door and push the white button on the mpu board does the same thing. Will not let me go into the operator menus . ANY IDEAS Thanks (SLOTS OF FUN) :99- Title: Re: IGT S 2000 PROBLEM Post by: Railroad94 on December 25, 2009, 11:04:00 PM When you turn the Key and get into the attendant menu,can you get to option 6 to make sure it is not disabled.
Maybe swap boards from one of the other working machines and see what you get. Title: Re: IGT S 2000 PROBLEM Post by: slots of fun on December 26, 2009, 12:27:57 AM 6 Would be out of service mode from the operator menu options. There are only 3 options in the attendant menu :25- 1.accounting 2.History 3. I/o test
:103- Title: Re: IGT S 2000 PROBLEM Post by: Railroad94 on December 26, 2009, 01:48:36 AM My mistake on the attendant menu and getting to option 6. With multiple machines I would still do an easy board swap and see what happens otherwise you might be stuck doing a ram clear
Title: Re: IGT S 2000 PROBLEM Post by: KirkLasVegas on December 26, 2009, 02:21:08 AM My mistake on the attendant menu and getting to option 6. With multiple machines I would still do an easy board swap and see what happens otherwise you might be stuck doing a ram clear Bet it's looking for the SAS.... he can look at the comm settings and see if it's running and what port. If thats the case Keychip it..... Kirk Title: Re: IGT S 2000 PROBLEM Post by: MarlboroMan on January 02, 2010, 06:57:49 PM You might check to see if you got one of the door switches installed backwards.
Title: Re: IGT S 2000 PROBLEM Post by: MarlboroMan on January 02, 2010, 07:08:32 PM I say that because it sounds like you are getting a door close signal when the door is open. :20-
Title: Re: IGT S 2000 PROBLEM Post by: slots of fun on January 03, 2010, 12:22:06 PM :25- no when you open the door it says m door open and when you close the door it says closure m ! thanks for you thought . :25- :88- Ron..............
(SLOTS OF FUN) Title: Re: IGT S 2000 PROBLEM Post by: slots of fun on January 03, 2010, 12:27:04 PM I think Kirk is on the right track when i get the key chip will post back . :88- Ron (SLOTS OF FUN)
Title: Re: IGT S 2000 PROBLEM Post by: MarlboroMan on January 03, 2010, 04:34:41 PM Just a thought. Hope the chip thing works.
|