|
Title: New error message--Coin Reverse Post by: Jimise on January 02, 2010, 10:26:05 PM Hello all, I got a new message on the screen of my Gamemaker.
It says Game Disabled Coin Reverse I put a few nickles through it and this poped up. Any idea what would cause this one? Thanks everyone!! :131- Title: Re: New error message--Coin Reverse Post by: StatFreak on January 03, 2010, 12:22:17 AM What comparitor does your machine have installed?
If it is a CC-62-D with the optic board off to the side, check the path of the coins through the comparitor. There is a piece of metal with scored marks on it at the bottom of the comparitor which is held tight by a nut and bolt that goes through the comparitor and holds the black plastic optic in place. This piece of metal sets the width of the exit hole at the bottom by sliding to the left to make the space larger, or to the right to make it smaller. It has a tab on the lower left side that acts as the left "wall" for the exit hole of the coin. Make sure that the width is set to just barely allow a coin through the space without binding. You will need to remove the comparitor to do this. There is also a metal shim running inside the coin path from the upper left down to the lower left hand side of the comparitor. It comes to rest inside and against the tab of the metal plate that you move. Make sure that it is pushed firmly against the left tab of the metal plate. Title: Re: New error message--Coin Reverse Post by: Jimise on January 03, 2010, 12:45:04 AM The comparitor says CC-62-D
What comparitor does your machine have installed? Title: Re: New error message--Coin Reverse Post by: StatFreak on January 03, 2010, 12:50:47 AM The comparitor says CC-62-D What comparitor does your machine have installed? See above. :88- I took the liberty of assuming that.. :96- :208- Title: Re: New error message--Coin Reverse Post by: Jimise on January 03, 2010, 01:00:54 AM Excellent work! Thank You!!
The comparitor says CC-62-D What comparitor does your machine have installed? See above. :88- I took the liberty of assuming that.. :96- :208- Title: Re: New error message--Coin Reverse Post by: StatFreak on January 03, 2010, 01:13:14 AM Let me know if that works.
Title: Re: New error message--Coin Reverse Post by: Jimise on January 03, 2010, 01:56:47 AM Hello StatFreak. I adjusted the piece of metal with the scored marks to a nickle size, put about 100 nickles through it, and it is working!!
The comparitor looks like it was set up for quarters. I think this was a quarter machine originaly. This is awsome! Thanks so much for the help! :131- :3- Jim...... Let me know if that works. Title: Re: New error message--Coin Reverse Post by: StatFreak on January 03, 2010, 02:27:24 AM I'm glad to hear that it's working. Enjoy your machine! :199- :71-
|