New Life Games Tech Forums

**Reel Slots** Gaming Machines => CDS Reel Games => Topic started by: Koni on January 12, 2010, 05:15:16 PM



Title: CDS Blowing fuse
Post by: Koni on January 12, 2010, 05:15:16 PM
Hello All,
I have a CDS On The Money that is blowing the first fuse from left to right (small fuse) there are three next to the on off switch This happens as soon as I turn on the machine. The flouresents light but nothing else. Any idea what the fuse goes to or what it may be? Thanks -Koni


Title: Re: CDS Blowing fuse
Post by: Koni on August 10, 2012, 09:02:03 PM
Hello All,
I have a CDS On The Money that is blowing the first fuse from left to right (small fuse) there are three next to the on off switch This happens as soon as I turn on the machine. The flouresents light but nothing else. Any idea what the fuse goes to or what it may be? Thanks -Koni
I know this is a very old post. Believe it or not I just got around to this machine again and had to share with everyone what I found. Apparently this has happened to others. The solution was don't laugh, the top power supply was grounding to the cabnet. Ok you are laughing. There are 4 holes on the power supply to screw it to the cabinet. Do not use the bottem right hole to insert a screw. IT WILL GROUND IT. Dummy oversight on my part when I was rebuildig the machine. I had aprox. 50 hours into searching for the problem. Good news is I learned a lot about CDS machines.  Enjoy! Koni


Title: Re: CDS Blowing fuse
Post by: Jimise on August 11, 2012, 02:20:09 AM
Glad to hear you (finally) got it working again   :3-
Good info!
Hello All,
I have a CDS On The Money that is blowing the first fuse from left to right (small fuse) there are three next to the on off switch This happens as soon as I turn on the machine. The flouresents light but nothing else. Any idea what the fuse goes to or what it may be? Thanks -Koni
I know this is a very old post. Believe it or not I just got around to this machine again and had to share with everyone what I found. Apparently this has happened to others. The solution was don't laugh, the top power supply was grounding to the cabnet. Ok you are laughing. There are 4 holes on the power supply to screw it to the cabinet. Do not use the bottem right hole to insert a screw. IT WILL GROUND IT. Dummy oversight on my part when I was rebuildig the machine. I had aprox. 50 hours into searching for the problem. Good news is I learned a lot about CDS machines.  Enjoy! Koni