New Life Games Tech Forums

**Video Slots** Gaming machines => VLC Machines => Topic started by: MDESIM9857 on January 15, 2010, 08:35:07 PM



Title: Need help with an error code.
Post by: MDESIM9857 on January 15, 2010, 08:35:07 PM
I am getting this error

Game temporarily suspended  door open  Logic door (see photo)

Any help would be appreciated.


Title: Re: Need help with an error code.
Post by: knagl on January 16, 2010, 10:50:26 AM
Greetings. I'm on a cell phone at the moment and can't see the picture, but based on the text you provided...

The logic door, assuming it's an upright, is located above the monitor.  There are magnetic sensors (like those used on alarm sensors on doors for a home or business alarm system) that tell the machine if a door is open or closed.

The first simple thing to try would be to unlock the top door, slide the drawer out towards you a little, then firmly slide it all the way back into the machine and close and lock the top door.

If you still have the door open message at that point, it'd be time to check the magnetic contacts to make sure they're working properly. I don't remember which one it calls the logic door -- it's either the small top door, or the drawer that slides out once you have that door open.  (If memory serves, there's a magnetic sensor for the door open message on the back of the drawer -- the part of the drawer that is furthrest into the machine.)


Title: Re: Need help with an error code.
Post by: P3 on December 19, 2010, 08:46:12 PM
if the problem is the magnec sensor.. just short the wire red on black and its fix.. ;)
only if you don't have any remplacement sensor :)
Michael


Title: Re: Need help with an error code.
Post by: P3 on February 03, 2011, 02:59:56 PM
put a jumper on 2 pin in the  j8 plug on the main board.. and its gonna fix the logic door problem.