|
Title: Bv200 swapped out Post by: mkd3b on January 22, 2010, 07:16:15 PM Just received a bv 200 swwapped out the 145 and presto up and working takes bills all 4 ways accept wont take any singles I read somewhere that some states machines wouldnt take singles I think Jersy . Is this something that I can fix or is that the way the Validator is programmed within the eprom. Thanks ArtD
Title: Re: Bv200 swapped out Post by: stayouttadabunker on January 22, 2010, 07:37:24 PM It's in the DBV chip...
Your machine doesn't know if it's at the bottom of the Pacific Ocean or on top of Mount Everest... :72- Title: Re: Bv200 swapped out Post by: mkd3b on January 22, 2010, 08:02:22 PM Was Just looking at a manual for the 200 and shows dip settings for the bills to be accepted Ill have to take a look at those or are you saying there is no way to get it to accept bills with the current chip. I under stand my macine doesnt know where it is I meant to say it was programmed no to accept singles in some states
Title: Re: Bv200 swapped out Post by: dpalmi on January 22, 2010, 08:46:23 PM Hello!
Check the dips mentioned in the pic below... Link to the manual http://www.jcmglobal.com/Libraries/Product_Manuals/DBV-200.pdf (http://www.jcmglobal.com/Libraries/Product_Manuals/DBV-200.pdf). Dan #2 Title: Re: Bv200 swapped out Post by: mkd3b on January 22, 2010, 09:13:30 PM I found that page before and found dips 1+9 were on so I a flipped switch 1 and left nine alone which according to the manual is for ID 023 + SDS coupon. Does that have something to do with accepting printed tickets? Validator is now accepting all bills. Thanks
|