|
Title: Gamemaker monitor question Post by: tollguy316 on January 23, 2010, 05:13:35 PM Hello .. I have a 13" upright Gamemaker and I see that John42355 has a 13" monitor on e-bay ...http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290393809937&ssPageName=STRK:MEWAX:IT (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290393809937&ssPageName=STRK:MEWAX:IT) ... Will this work with my Gamemaker ??? If so; anything I need to know ; or specific steps to installing the monitor ??? Thanks for any input... Bill
Title: Re: Gamemaker monitor question Post by: Neonkiss on March 28, 2010, 09:43:34 PM I need to know what size the pins are for the monitor plug on the Game Makers V7000
Is it the Molex .062 pin? Title: Re: Gamemaker monitor question Post by: StatFreak on March 31, 2010, 12:43:52 AM I need to know what size the pins are for the monitor plug on the Game Makers V7000 Is it the Molex .062 pin? I cannot find a parts list description. :37- :37- The part should be CBL-20086-0001. I measured the pins holes manually, and center to center between pin on and four (three pins over) is 7/16". That comes out to 0.146" between each pin. A pin size of 0.062 sounds about right. If no one else can verify it, I can pull the monitor and measure the pin diameters. Why don't they list this stuff in the manual?? :37- 0 0 0 0 ^ ^ └── 7/16" ─┘ Title: Re: Gamemaker monitor question Post by: Neonkiss on March 31, 2010, 11:35:41 AM Why don't they list this stuff in the manual?? :37- I wish I knew... I'll order up some .062 pins and see how they fit. I believe they are the same pins used in the Bally 5500 reel mech connectors. Thanks for checking. :3- :3- :3- |