|
Title: wba 12 * almost there?* Post by: jbt777 on January 23, 2010, 06:15:12 PM I just finished wiring my wba 12 to an s+. But it doesn't do anything. The two led's on the acceptor are steady red, no blinks. When a bill is placed into the slot, nothing happens. But when you turn the machine off then on, motors run for a second while reels are resetting. Maybe the dip switches need to be set? Any help would be great. Thanks
Title: Re: wba 12 * almost there?* Post by: Fingroper on January 28, 2010, 01:05:00 AM Hi There,
Our WBA 12 in normal mode have both LEDs on and they don't flicker. The more working at start up is normal. Your BA might have something wrong with the sensors. If you go to http://www.jcmglobal.com/en/support/downloads.aspx and download the WBA guide, there are several tests you can do to the BA to try and determine what might be causing the BA not to operate. |