|
Title: manual cbv Post by: doogie on January 27, 2010, 10:56:26 AM i need a manual for a coin bill validator model #1vo2 made by coin bill validator inc from new york
Title: Re: manual cbv Post by: Brianzz on January 27, 2010, 11:20:07 AM I have no idea of the validator name yours is but I'm sure you can find something here
http://www.gptworld.com/GPT.htm (http://www.gptworld.com/GPT.htm) Title: Re: manual cbv Post by: doogie on January 27, 2010, 11:46:07 AM this company changed hands in the mid 80's
Title: Re: manual cbv Post by: TZtech on January 27, 2010, 12:00:40 PM Hi
The company became GPT later on. good website but that BV is 3 generation behind so nothing on website Unfortunately cant find a manual for that BV. Not even from the CBV rep here in south Africa. There was a post about these in the Atronic section. Regarding your calibration problem all you need to do is cut a piece of plain white paper to the same size as a bill. You flip a dipswitch and insert this paper to perform what is called a video level adjustment. Will see if i have that page that was posted somewhere as that had the dipswitch setting on. Ian Title: Re: manual cbv Post by: doogie on January 27, 2010, 01:04:49 PM sounds good any help is appreciated
Title: Re: manual cbv Post by: TZtech on January 30, 2010, 08:19:05 PM Hi
Have replied with prodedure on your other post. PM me with a email that can recieve a 17M file. Ian Title: Re: manual cbv Post by: doogie on January 31, 2010, 12:00:14 AM you can email me directly at doogcat@hotmail.com thanks
|