|
Title: Need some help setting up an new X-10 on a Ballys 6000 Post by: gameshop22 on January 29, 2010, 03:30:58 PM Can anyone offer some steps to take or a manual for the X-10.
im really new wuth slots and I would like my 6000 to accept coins instead of bills only. thank you, Mike Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: a69mopar on January 29, 2010, 03:51:42 PM Hi,
I have the manual at home, caan send it later or tomorrow if noone else does. I'm away at the moment. Thanks, Wayne On mobile Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: Buzz on January 29, 2010, 04:11:58 PM Can anyone offer some steps to take or a manual for the X-10. im really new wuth slots and I would like my 6000 to accept coins instead of bills only. thank you, Mike www.idxinc.com Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: reho33 on January 29, 2010, 04:22:02 PM Have you considered the Imonex V9? No power required unless you need the lockout.
Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: a69mopar on January 29, 2010, 09:32:55 PM Thanks Buzz. here is the direct link to the manual. IDX X-10 Manual (http://www.idxinc.com/downloads/X10_Manual.pdf)
Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: KirkLasVegas on January 29, 2010, 11:16:01 PM Isnt setting up a "X-10" kinda like stepping on the pointy end of a garden rake????
Kirk Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: a69mopar on January 30, 2010, 12:46:49 AM I use a lot of x-10 acceptors, it does take a bit to get used to at first, and takes a lot longer than popping a coin in a comparitor, but with the varying consistency of Canadian quarters, the x-10 has a higher acceptance rate.
Thanks, Wayne Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: gameshop22 on January 30, 2010, 12:48:55 AM REHO? whit that one your saying it will work with any model yesr bally, i was told i need to chsnge out my mains to 2003 mains to get the cd-16 or the X-10 to work.
Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: a69mopar on January 30, 2010, 01:34:46 AM REHO? whit that one your saying it will work with any model yesr bally, i was told i need to chsnge out my mains to 2003 mains to get the cd-16 or the X-10 to work. That's not true, the cc16d or x-10 will work with most mains.Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: reho33 on January 30, 2010, 01:36:42 AM I have 2003 mains but the CC-16 is not working but I might have a bad set of optics.
Title: Re: Need some help setting up an new X-10 on a Ballys 6000 Post by: stayouttadabunker on January 30, 2010, 02:01:53 AM Isnt setting up a "X-10" kinda like stepping on the pointy end of a garden rake???? Kirk Maybe, but once you do and the handle hits you smack in the face - you don't forget... :72- |