|
Title: wba 12 Post by: jbt777 on February 01, 2010, 01:43:03 PM When they say that wba 12 is flash programmable, can it be changed from an id 003 to an id022 / 023? I've tried everything trying to get this thing going and the only thing I can think of is that it might not have the right software to communicate with the s-plus. In test mode, it accepts bills , rejects fakes, but no credits to the machine. When taken out of test mode, bezel doesn't light, won't accept anything. ??????? :103-
Title: Re: wba 12 Post by: jay on February 01, 2010, 01:50:11 PM Have you used a set chip (with the S+) to enable communication with the slot ?
Title: Re: wba 12 Post by: jbt777 on February 01, 2010, 02:32:07 PM I did a ram clear as well as a set chip. machine shows bv to be enabled, but nothing.
Title: Re: wba 12 Post by: dpalmi on February 01, 2010, 03:19:09 PM Is a denomination selected?
Dan #2 Title: Re: wba 12 Post by: jbt777 on February 01, 2010, 09:17:22 PM problem solved finally!! Thanks :244-
Title: Re: wba 12 Post by: CaptainHappy on February 01, 2010, 09:47:00 PM problem solved finally!! Thanks :244- Could you share what the solution was for people who may read this thread in the future? They may have the same problem. CaptainHappy :95- :nlg- ADMIN Title: Re: wba 12 Post by: jbt777 on February 02, 2010, 09:04:23 PM After burning my brain on this for a few weeks, I found out that my unit needs to be flashed in order for it to be enabled. Ben at Fannini Slots is capable of doing this type fix. Thanks Again
|