|
Title: Need Help Double diamond haywire Post by: samsung on February 03, 2010, 04:08:27 PM I am new at this it is my first machine what I would like to know is how can I get it :103- to take coin right now it it coinless the machine is a nickle machine it will take bills and print tickets but will not take nickles when you put one in they drop right through to the tray it dose have a coin comparitor and there is a green light lite up on it also there is a hopper that works in test mode the machine is a Vision round top that someone turned into a double diamond haywire
Title: Re: Need Help Double diamond haywire Post by: cruisepl on February 03, 2010, 04:35:08 PM Check the coin comparitor and make sure there is a nickel behind the slide not a token. If there is a nickel there try replacing it with another coin and try again
Title: Re: Need Help Double diamond haywire Post by: samsung on February 03, 2010, 04:55:13 PM I replaced it with another coin got the same results
Title: Re: Need Help Double diamond haywire Post by: stayouttadabunker on February 03, 2010, 05:09:22 PM With a small screwdriver, turn the sensitivity adjuster on the
coin comparitor clock-wise then turn back clock-wise a 1/4 turn. There's a pair of wires coming out of the top of the coin comparitor... are they green or gray? Title: Re: Need Help Double diamond haywire Post by: samsung on February 04, 2010, 02:18:58 AM I turned the adjustment same thing coin drops out into tray the two wires are green
Title: Re: Need Help Double diamond haywire Post by: Brianzz on February 04, 2010, 02:46:08 AM Sounds like coin in/out is disabled. BV/Printer only. You'll need a KEY chip to change this
Title: Re: Need Help Double diamond haywire Post by: Foster on February 04, 2010, 05:05:49 AM They may only need to adjust hopper limit.
If it is set to $0.00 it will not accept coins. if using quarter denomination set to something like $50.00 to $100.00 thats 200 to 400 quarters before hand pay or ticket payout. For Example (from my S2000) 3.1.4 Limits Hopper $300.00 3.1.11.1 Split pay - Enabled. 3.1.11.2 Coin Pay Limit ($) 300.00 note hopper and split pay limit match. I forgot what happens when they do not match but I didnt like it. Title: Re: Need Help Double diamond haywire Post by: U.S.AutoService on April 22, 2010, 09:32:21 PM They may only need to adjust hopper limit. If it is set to $0.00 it will not accept coins. if using quarter denomination set to something like $50.00 to $100.00 that's 200 to 400 quarters before hand pay or ticket payout. That's really good information, :89- I have been setting my hopper limit to zero to always have hand pay. Don't have to worry about having a working hopper, or a ticket printer out of paper... I'll have to try putting in a coin just to test this new information out.. thanks... :244- :137- U.S.AutoService Dan |