|
Title: 3 refurbished slots Post by: Goldfinger on February 18, 2010, 03:56:30 AM I didn't get the before pictures of these 3 but they were pretty rough and covered from top to bottom with about 2 inches of muck,dirt and grime,
only had to replace parts of the laminate, mostly the sides, that was peeled from scraped out machines, because they were perfect matched and not that bad to peel if you just take your time, goof off a heat gun and a puddy knife.note don't mix the heat gun with the goof off. the, the bill validators were removed and covered 2 of them with stainless steel blank light switch covers and the bally with a piece of smoked mirror, 2 of the top frames were finished off with mirror and automotive trim, to cover the holes all 3 had all the glass replaced all 3 had the reel strips replaced thanks for looking Bob Title: Re: 3 refurbished slots Post by: Goldfinger on February 18, 2010, 03:57:38 AM and a couple pics of the Bally
Title: Re: 3 refurbished slots Post by: StatFreak on February 18, 2010, 09:35:03 AM It looks like you did a nice job cleaning those up Goldfinger. :244- :244-
Thanks for posting the pictures and sharing what you did to restore the machines. :71- Title: Re: 3 refurbished slots Post by: CaptainHappy on February 18, 2010, 11:17:46 AM It looks like you did a nice job cleaning those up Goldfinger. :244- :244- Thanks for posting the pictures and sharing what you did to restore the machines. :71- :212- K+ for sharing you projects with us! Looking really good! (The switch cover plate idea is a really good one!!) :244- :244- :244- CH :95- Title: Re: 3 refurbished slots Post by: Thor777 on February 18, 2010, 09:51:09 PM Great job :244-
I always love to see other peoples pics of machines especially when they do work on them themselves ! :89- Title: Re: 3 refurbished slots Post by: junkman on February 11, 2011, 09:54:39 AM very nice job!
|