New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Other Arcade Games => Topic started by: partytime on February 21, 2010, 11:30:17 PM



Title: 8 liner harness
Post by: partytime on February 21, 2010, 11:30:17 PM
Who makes the most user friendly harness.....


Title: Re: 8 liner harness
Post by: stayouttadabunker on February 22, 2010, 12:54:28 AM
I think it depends on which 8-liner game board you have.
Remember there are many different types/options for different 8-liners....
some are even 25-liners.
The best way to understand the harnesses is to first get a
copy of the pin-outs that come off your board.
Once you have that in your hand, knowing which wire goes
where is a piece of cake...if not, think of it as a little puzzle.
Everything can't be too easy!  :96-

Some companies make specific harnesses for specific boards.
However, I will warn you, it may cost more because they're configuring
the wires and clips when it's really not that hard to do yourself if
you make a trip to the hardware store and pick up some connectors, and a good crimper.


Title: Re: 8 liner harness
Post by: ROCKET on February 22, 2010, 11:35:01 AM
Who makes the most user friendly harness.....


twistedquarter    on ebay buy the harness and buttons in one shot the harness is the same for all 8-liner games from 8lines to 9lines to 15-lines to 20 lines to 25 lines

the only harness that is different is for a pot of gold game -which is a touch screen game multi game board .

they have the best quality size wire for the money i tried them all on ebay .. many had cheap small wires and the ones with blue edge connector suck !!
TWISTEDQUARTER is the best bet on 8-liner parts ..  

you can use a convection cooled power supply or a atx power supply with there harness .. its wired for both .