|
Title: Button replacement - vendor & Part numbers Post by: Jeff99 on February 23, 2010, 01:26:16 AM Hi,
I need to replace some of the buttons on my Game Maker. A couple of the small square and large rectangular buttons. Does anyone know the Bally part number for these and where I might buy them. Thanks, Jeff Title: Re: Button replacement - vendor & Part numbers Post by: blueridgeslots on February 23, 2010, 02:15:33 AM We have the Bally Factory Rectangular ones Brand New
Title: Re: Button replacement - vendor & Part numbers Post by: StatFreak on February 23, 2010, 04:21:14 AM We have the Bally Factory Rectangular ones Brand New Jim, do you have the inserts for them as well (V7000 GM)? If so, I'll take a full set of 5 square and 5 rectangular buttons and inserts. :71- I'll send you a PM. While we're on this subject, Jeff99 had asked me if I knew the part numbers for these, and I discovered that I don't seem to have the parts listing portion of the GameMaker manual. Does anyone have a copy? :103- Title: Re: Button replacement - vendor & Part numbers Post by: JOHN42355 on February 23, 2010, 10:06:05 AM Stat ,I Have a GameMaker Manual Here http://rudysdeals.com/index.php?route=product/product&path=54&product_id=96 , Hope This HELPS
Title: Re: Button replacement - vendor & Part numbers Post by: StatFreak on February 23, 2010, 11:14:38 AM Thanks John. :88-
I appreciate it, but I have the manual. It does not have detailed parts lists for the entire machine -- only for the hopper, ticket printer, dbv, and coin mech in Module 8. :60- Title: Re: Button replacement - vendor & Part numbers Post by: JOHN42355 on February 23, 2010, 11:33:16 AM I will see If I do have the parts manual , and will upload it For Ya.
Title: Re: Button replacement - vendor & Part numbers Post by: TZtech on February 23, 2010, 03:23:10 PM Hi All
http://slot-tech.com/interesting_stuff/bally/V7200%20Game%20Maker/ (http://slot-tech.com/interesting_stuff/bally/V7200%20Game%20Maker/) Credit as always to Randy Fromm - Lots of good stuff on his FTP site. Ian Title: Re: Button replacement - vendor & Part numbers Post by: daddy2yea on February 23, 2010, 10:55:09 PM The buttons that fit the Gamemaker are call Poker VLT Buttons. Go to http://www.m-csupply.com/index.html and click on the VLT Button/IPB Buttom link on the left side, then under Poker VLT Buttons click on the Square VLT buttons link and you'll see your buttons. This guy Charges $4.50 per button and that includes the legends of your choice. If you Replace all of your buttons with shipping it will net you around $5.50 per button, and these are brand new. I know because I replaced all the buttons on my Gamemaker. Hope this helps. Mike
Title: Re: Button replacement - vendor & Part numbers Post by: StatFreak on February 24, 2010, 12:47:30 AM The buttons that fit the Gamemaker are call Poker VLT Buttons. Go to http://www.m-csupply.com/index.html and click on the VLT Button/IPB Buttom link on the left side, then under Poker VLT Buttons click on the Square VLT buttons link and you'll see your buttons. This guy Charges $4.50 per button and that includes the legends of your choice. If you Replace all of your buttons with shipping it will net you around $5.50 per button, and these are brand new. I know because I replaced all the buttons on my Gamemaker. Hope this helps. Mike Mike, thanks for the reference for the buttons.Ian, thanks for the link. Section 3 (not the 3a in the main manual) is what I was looking for. K+ to both to you. :3- :3- |