|
Title: Superlink Program for Mikohn Post by: Firebird on February 26, 2010, 12:44:15 AM Does anyone know where I can get the Superlink Program for setting up the mikohn controllers? I know the program exists but have had trouble trying to find it. Any help would be greatly appreciated.
Title: Re: Superlink Program for Mikohn Post by: coorslight115 on February 26, 2010, 12:48:10 AM Does anyone know where I can get the Superlink Program for setting up the mikohn controllers? I know the program exists but have had trouble trying to find it. Any help would be greatly appreciated. What controller are you trying to set up? Title: Re: Superlink Program for Mikohn Post by: Firebird on February 26, 2010, 06:07:12 AM The one we are currently trying to set up is either a old con2 or a led 5, been told that the psp v2.0 will not work on it but that the superllink program will
Title: Re: Superlink Program for Mikohn Post by: coorslight115 on February 26, 2010, 01:23:07 PM Con2 is a controller and a cham44 is a logic display board. PSP will communicate with the con2 but the cham44 has to be hooked up to a con2 or con1 for programming. the serial port on the cham44 is not used for anything. Post a picture of what you have and we can help further
Title: Re: Superlink Program for Mikohn Post by: jay on February 26, 2010, 06:24:38 PM The Cham44 is for use with a CON1 and is only connected with a 2 wire RS432 and not serially driven though the 9 pin.
|