|
Title: 4 reel assembly causing a 40 error code Post by: BALLIGATOR1973 on February 28, 2010, 03:07:29 PM Hi, After replacing a 3 reel assembly for a 4 reel assembly, I have a 70 code ( reel initialization problem), a ram clear did not clear it, I put the 3 reel assembly back an,d it worked properly...
Why should the 4 reel assembly cause that? Any dip switch on the board to change? Any clue might save my machine... Thanks Cyril Title: Re: 4 reel assembly causing a 40 error code Post by: stayouttadabunker on February 28, 2010, 03:35:55 PM Is this for a Bally 5500 or a Bally 6000?
Title: Re: 4 reel assembly causing a 40 error code Post by: Neonkiss on February 28, 2010, 04:21:05 PM The program your running, Is it a 4 reel program????
Title: Re: 4 reel assembly causing a 40 error code Post by: StatFreak on February 28, 2010, 08:14:40 PM All of the above questions, plus: Could there be a hardware issue with your 4-reel reel & harness assy.? :103-
Title: Re: 4 reel assembly causing a 40 error code Post by: BALLIGATOR1973 on March 01, 2010, 11:52:01 AM Hi,
Thanks for your replies. I have tested programs which used to work on a 4 reel assembly and it worked. Meaning that my programs were not for a four reel game... |