Title: IGT S coin comparitor? Post by: CUDA3134 on March 02, 2010, 04:51:49 AM Picked up another non working slot on sat. This one is a Igt s Money Storm. Giving me a code twelve but the battery is new .Coin comparitor is not working, rejects all. I had to put it back together, spring and counter weight found in back left corner of machine.the comparitor is a cc-15 is this correct for this slot ?The guy I got it from said it worked fine until it started rejecting the coin. Both wires going to it have 10 to 12 volts.HELP
Title: Re: IGT S coin comparitor? Post by: StatFreak on March 02, 2010, 10:25:11 AM Money Storm is a type 2 game with haywire action. This would not be supported in an S slot. Are you sure that you have an S, or could it be an S+? You should be using a CC-16D 24v comparitor in the S+.
Also, new batteries have been known to be bad. In fact, it's much more common than commonly believed. Have you checked the battery voltage with a VOM? It should be about 3.7volts or so if it's new (3.6v battery) If it is below 3.0 volts, it would need to be replaced. Title: Re: IGT S coin comparitor? Post by: CUDA3134 on March 02, 2010, 04:25:42 PM I actually have two of the s-slots the MPU has three connectors one on the right lower two on the top. Both machines have a daughter board on the main and the chip on the Storm has a H W label on it. The old battery had 3.3. volts ( Wife insisted i change it ) new is 3.6. If it needs a cc-16 I will try to find one have no idea why it has a cc-15. Thanks Dale
Title: Re: IGT S coin comparitor? Post by: ROCKET on March 02, 2010, 04:44:44 PM I actually have two of the s-slots the MPU has three connectors one on the right lower two on the top. Both machines have a daughter board on the main and the chip on the Storm has a H W label on it. The old battery had 3.3. volts ( Wife insisted i change it ) new is 3.6. If it needs a cc-16 I will try to find one have no idea why it has a cc-15. Thanks Dale >> TOUCHY LAND TO CROSS HERE << DO YOU ALWAYS LISTEN TO THE WIFE ?? LOL SHE WILL PLAY THE MACHINE WHEN DONE ?? THEN WHAT :72- :72- :72- :72- :72- :72- :72- Title: Re: IGT S coin comparitor? Post by: CUDA3134 on March 02, 2010, 06:41:26 PM If any one has a cc-16 with a two wire harness coming off it let me know . I also need to know which two wires are supposed to be hooked to the reset key switch. What color and from which harness [ WIRE COUNT ] . Someone cut the wires loose and I want to be sure and hook up the right ones.
|