|
Title: Bally 145-SG bill validator Post by: B-52BadByron on March 08, 2010, 02:19:48 AM I have a Bally 5500 Blazing 7's slot and I am attempting to hook up the bill validator. On the right side the hookup looks simple, on the left side there are several places to plug in connectons. The only issue is that the wires that appear to plug into the side of the validator are pluged into a 4x4 inch wafer board that is sitting loose next to the slot reels. Do I unplug the connections on the loose board and plug them into the bill validator or what? Any pictures of the correct connection setup would be appreciated. :103- :103- :103-
Title: Re: Bally 145-SG bill validator Post by: B-52BadByron on March 09, 2010, 01:26:41 AM Here's the answer to my own question. Jim, from blue ridge slots sold me a couple of these validators and told me to plug the 3 x 3 in board into the left side of the validator. And it works. I would never have guessed that the board plugged into the validator. Thanks, Jim.. :131- :131- :131-
|