|
Title: Clear & key chip instructions for S2000 double diamond needed Post by: samsung on March 08, 2010, 10:56:39 AM I have the Clear & key S2000 double diamond the machine is set up as coinless it has a hopper and a comparitors I have a new battery I would like to install and have the machine take coin what I am looking for is instructions on how to use the clear chip and key chip and setup this is my first machine not quite sure how to do this
Title: Re: Clear & key chip instructions for S2000 double diamond needed Post by: tacman on March 08, 2010, 11:13:26 AM Look in the Submit New File tab, I saw S2000Visionsetup.pdf there. I believe all you need to use is the key chip. Pull the base chip from the board (SB # on eprom), replace with the key chip Make sure the notches in the chips are correct) and then turn on machine and wait a few seconds. Turn off, pull board and pull key and replace with base chip. Turn on again and you should be able to access key chip menu through blue VFD display on door of machine after pushing white button on MPU. Use instruction from pdf to make your changes.
Dan (tacman) Title: Re: Clear & key chip instructions for S2000 double diamond needed Post by: stayouttadabunker on March 08, 2010, 12:30:58 PM What Tacman said above is great! :131- :3-
This can also be helpful as well. :89- Bettor Slots was helping out a member one day and sat down and wrote a book! lol I always saved it in Wordpad for it contains very good details!!!>>> |