New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games. => Topic started by: snuggsun on October 22, 2008, 03:24:49 PM



Title: Progressive Jackpot problem configuration
Post by: snuggsun on October 22, 2008, 03:24:49 PM
Hello again, i have since i buy this machine a problem with my jackpot that never apear the value of it.
It shows this numbers (as shown in the pic) that i dont know what they mean,
I dont know too how to configure the deep swith (jackpot)in the motherboard and in the upper boards as you can see in the pictures what should i choose, i only have 1 slotmachine.
Thanks in  advance

Best regards


Title: Re: Progressive Jackpot problem configuration
Post by: knagl on October 22, 2008, 07:10:38 PM
I remember on the old site that someone had a progressive meter like this one.  After much discussion it was decided that it was in fact a progressive meter (not a slot club card display).

I'm not sure that we ever resolved the issue, though, as nobody else had ever seen one before.  It's obviously not one of the standard IGT Mini Photon displays.  Anyone have any ideas?


Title: Re: Progressive Jackpot problem configuration
Post by: uniman on October 22, 2008, 09:00:41 PM

Doesn't SMIB mean "System Management Interface Board"?  :103-



Title: Re: Progressive Jackpot problem configuration
Post by: CaptainHappy on October 22, 2008, 09:33:32 PM

Doesn't SMIB mean "System Management Interface Board"?  :103-



Uniman,

That is what I thought, but maybe as I heard "Slot Machine Interface Board?" (I am sure that one of them is correct,  ant that both get used. System Management sounds more technical though!) If so, I thought that it has something to do with player tracking inferfaces. Maybe not progressive after all??? I defer to the experts here!  :131-

CaptainHappy :95-


Title: Re: Progressive Jackpot problem configuration
Post by: stayouttadabunker on October 22, 2008, 09:36:09 PM
Doesn't SMIB mean "System Management Interface Board"?  

 :72- :72- :72- NO!... Slot machine interface board!!! I was just answered that a few days ago on another thread.
 Problem is...no one knows how to program them.
Or has anything to change the display values, for example:  such as resetting it to zero.
I was told it was for back room accounting