|
Title: error Post by: gadiel on March 16, 2010, 05:55:00 AM does anybody happen to know how to fix this error (restart closure mb)----its on an igt s2000
Title: Re: error Post by: Foster on March 16, 2010, 06:04:47 AM Please post pictures, what did you or the machine do just before the error occurred.
The more details given makes troubleshooting easier. Not sure about the restart part - "closure mb" means main and BV doors are closed. Title: Re: error Post by: jay on March 17, 2010, 02:40:40 AM On my PE+ I get restart closure right after I close the door and restart the machine.
Its more of an audit message than a error. Goes away after I play the first coin. Not sure what MB means. Is the game playing ok ? Title: Re: error Post by: cowboygames on March 17, 2010, 05:53:06 AM closure m is the main door. I beleive the B has to do with bill validator door or cash can not in place
Title: Re: error Post by: stayouttadabunker on March 17, 2010, 02:30:37 PM Can I throw this out there?
Sometimes MPU boards have locking trays and I've also seen some machines with magnetic proximity door sensors glued to them. Could "closure mb" mean that? :103- With the "mb" as being understood to mean "motherboard"? Title: Re: error Post by: gadiel on March 17, 2010, 03:29:52 PM i found the solution it needed a small little paper stuck on the sensor door since the machines i bought didnt have a lock ...
Title: Re: error Post by: stayouttadabunker on March 17, 2010, 03:38:02 PM Thanks for reporting the fix :3- :3-
But how did this piece of paper cause a door error code to pop up? :129- Title: Re: error Post by: gadiel on March 17, 2010, 03:43:31 PM well the paper is in the middle of the metal latch that touches the back metal part it sounds complicated but its not i would post picture :72-
Title: Re: error Post by: stayouttadabunker on March 17, 2010, 04:14:41 PM lol....You're right...I shouldn't have asked!!! :97-
A pic would be a lot easier sometimes...lol Title: Re: error Post by: CaptainHappy on March 18, 2010, 12:20:39 AM Can I throw this out there? Sometimes MPU boards have locking trays and I've also seen some machines with magnetic proximity door sensors glued to them. Could "closure mb" mean that? :103- With the "mb" as being understood to mean "motherboard"? Closure MB is a combined reporting for Closure Main Door and Closure Bill Door, not motherboard, especially since it is the MPU board on the tray and not the motherboard. :200- I am pretty sure that the proximity sensors that you spoke of are for certain special games that have added security to notify IGT if the trays are removed. (Even though I do not think the casino has the tray keys on these?) They also know when the door is opened as well on these! :79- CH :95- |