|
Title: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: MrBellMan on March 20, 2010, 01:49:23 PM Last night I put my Fox n Hound Vision kit in a machine where my Super Spin was. I got everything installed and the 7 Segment Display Mismatch error showed up. How do you clear this error? I tried opening/closing the door, Key Chip procedure and went through the menu, but couldn't really find anything. The 7 segment display comes on and works perfectly in the test menu, so I'm at a loss...
The 7 segment display "IS" different than my other machines (See pics) and I'm guessing that has something to do with it. I searched the site last night, but could not find any info. Any ideas? Thanks! Rob Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: MrBellMan on March 20, 2010, 01:50:18 PM Two more pics...
Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: stayouttadabunker on March 20, 2010, 01:54:18 PM I wonder if the options in your chip support the multi-denom touchscreen pad?
Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: Tilt on March 20, 2010, 02:18:30 PM I think the machine is setup for a 5-5-2 display and your new cabinet has a 6-6-3.
I took a look at my S2000 Vision and it doesn't have 7.2.7 menu option, but my standard S2000's do. I think that may still be your problem, but now I'm not sure how you fix it :103- Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: MrBellMan on March 20, 2010, 04:36:35 PM Well, thanks for checking. I guess, I will find another cabinet to put the kit in... :8- :8- :8-
Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: MrBellMan on March 20, 2010, 05:09:05 PM OR...
I just happen to have a spare 5-5-3 and plug adapter... :89- :89- :89- Problem solved! Thanks everyone! Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: Tilt on March 20, 2010, 05:11:17 PM It would appear that SG380 doesn't support the 6-6-3 display. This is from the PSR:
7.2.7 7-Segment Display Type Although this option appears, it has no affect. The only available 7-segment display for this version is 5-5-2, which refers to the number of digits in the Winner Paid, Credits, and Credits Played windows, respectively. It didn't even appear on mine, but I didn't actually key the machine either. ETA: Glad you found an adapter to get it going! :89- Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: MrBellMan on March 20, 2010, 05:25:34 PM It sucks I lose my MD touch pad, but I can always install it in another machine.
Rob Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: idesign on March 20, 2010, 08:15:04 PM None of the vision games support the 663 except for Mata Hari 3 & 5 reel, Double Diamond Run 3 & 5 reel, and Cleopatra 3 & 5 reel, and only if you use SG00621.
Title: Re: How to clear a "7 SEGMENT DISPLAY MISMATCH" error? Post by: Droz on August 01, 2011, 08:32:12 PM Hi, folks
I just had the low main battery message on my S2000 (Triple Double Stars.) I just pulled the main board, pulled out the old OEM battery and replaced it. I assume it went well? Regardless, I continued to perform the RAM clear, then used the Key Chip (31) to reset the machine. That's where things got odd. I know I have done this before, when I first got it with no problems. This time, the farthest I can go is with the Dot Matrix display giving me a 7-Segment Display Mismatch error. I went through this twice (i think) using both 6-6-3 and 5-5-2. If I look at the display, I seem to be able to count 6 spaces in the top line, 6 spaces in the middle line and 3 spaces in the bottom line. Wouldn't that be 6-6-3, then? I have perfomed a reset on this machine in the past with no problems (when I installed a Multimedia Board.) Am I missing something? -D |