|
Title: Bally 1000 series showing error code 7 Post by: gagetguru4life on March 21, 2010, 07:14:31 AM I have a Bally 1000 series and it started showing up a boot up code 7. I was replacing the i/o board when it started this. Any ideas on what to check? Manual says its an missing clocked interupt? :103-
Title: Re: Bally 1000 series showing error code 7 Post by: FOXSSLOTS1 on March 21, 2010, 09:01:33 AM check the battery on the mpu and the board it resides on - there are cmos 5101s that go bad - as well as the edge connectors on that smaller board - try tweeking the smaller board and watch the win meter for any changes.
Title: Re: Bally 1000 series showing error code 7 Post by: gagetguru4life on March 23, 2010, 12:52:36 AM Ok,I reseated the daughter board and the Proms and Personality chips and were back online....thanks
|