|
Title: My first progressive Post by: CVslots on March 24, 2010, 12:34:44 AM Ok I can't put it off any longer. I'm working on my first progressive. I've done my 6 hours of trial and error and read the posts, here's were I'm at.
Bally 5500 BLZ 7's settings are: 78L - 1 002 = 005 007 = 001 Mikhon is set on: Display 1 JP Group SA Mfile 1 4 ID Speed 50 Font 10 Size 60 Test off GRADR 255 RTR Defult Machadd 1 Now when I turn it on I get a C10 then a C14 then a 00$ on the display. So how do I clear the error codes and set the JP value? Title: Re: My first progressive Post by: coorslight115 on March 24, 2010, 12:46:30 AM With the PSP software. Do you have that and the manuals to help you?
Hope you are a strong willed person :96- These are very addicting :200- :200- Title: Re: My first progressive Post by: CVslots on March 24, 2010, 01:47:07 AM I don't have the software or the manual. I do have one more 5500 and a 6000 to do after this one. :99-
Title: Re: My first progressive Post by: Foster on March 24, 2010, 03:05:05 AM PSP and related manuals are in the submit a new file secion
link is near the top under the vendors Title: Re: My first progressive Post by: StatFreak on March 24, 2010, 04:10:22 AM Get out your handkerchiefs. :8- :37- I hope that your experience with the 5500 is less painful than mine has been. :89- :71-
|