|
Title: IGT I Games mechanial meter dissconnect Post by: regency on March 24, 2010, 04:58:06 AM I have a IGT I games machine with a WBA 12/13 bill acceptor and a thermal printer JTPV2.08 the machine works fine for a few months and then gives mechanical meter disconnect, I have tried to ram clear the machine but the error will not go away.
Please could someone advice me on what to do next Title: Re: IGT I Games mechanial meter dissconnect Post by: TZtech on March 24, 2010, 05:30:13 AM Hi
Usually that is caused by a faulty or Loose IO Card. Do you have another machie that you can swp cards to confirm ? Ian Title: Re: IGT I Games mechanial meter dissconnect Post by: Belbtech on March 24, 2010, 05:51:23 AM Good call TZ, many times the I/O boards will unseat themselves...make sure they are seated into the connectors fully.
God bless, Mike><> Title: Re: IGT I Games mechanial meter dissconnect Post by: KirkLasVegas on March 24, 2010, 06:06:27 PM Hi Usually that is caused by a faulty or Loose IO Card. Do you have another machie that you can swp cards to confirm ? Ian And DO NOT reset them with the power on!!!! Kirk |